Hydronic Radiant Heating

December 19, 2008 00:12 AM  BY  STACEY BARRUS

Hydronic under floor heating are the most popular form of radiant heaters. This is mainly because these radiant heaters have been around the longest. This form of heating was first used by the Romans, but there have been significant developments since. In the most recent hydronic systems, PEX radiant tubing has been installed in a concrete mass called Gypsum Concrete or “Gypcrete.” This method works very well in most applications, but there have been developments in the installation process of hydronic under floor radiant heaters that make it easier to install for certain situations. This new development is known as a low-mass or modular board underlayment system. Rather than embedding the hot water tubing in concrete, the PEX tubing is laid in the grooves of pre-cut wood panels. This new method is ideal for remodeling and most new construction projects.

If you’d like to know more about both types of hydronic heating systems, contact the expert staff at warmzone.com.  They can help match your individual project with the best system at the best price. There isn’t a single system out there that is an ideal fit for every project, but there is an ideal system for every project. Also, because of the relationship that warmzone.com has with the manufacturers, they can guarantee the lowest price on the highest quality systems available.


  Radiant Heat Information  

AddThis Feed Button






Questions Concerning Home Heating

December 03, 2008 00:12 AM  BY  STACEY BARRUS

When replacing a home heating system, there are a lot of questions that people have in regards to new home heating systems.  Here is a questions that was recently asked.

Q: My 1,200 square foot home used to be heated by a furnace from 1949 that ran at 25,000 BTU. Recently I changed the system to a newer, 7,000 BTU system. I thought this newer heater would be more efficient, but I find that it takes much longer to heat the house than the older system did. Is there something wrong with my furnace or do I need one that has a higher BTU?

A: It’s a good idea to replace old heating systems with newer, more efficient models. These new models can work just as well or better than old systems, but they do work differently. Where old furnaces could be turned on and heat the house within a matter of minutes, new heating systems can take longer. If you want your home to be warm at a certain time, set the heat to go on about 45 minutes prior to that.

Another important factor is whether your home is “weather-tight.” Make sure all doors and windows are properly sealed. If not, you may be losing heat at the same rate your heating system is producing it. Check with a heating contractor who can tell you whether the new unit is sized correctly for your home’s square footage.


  Radiant Heat Information  

AddThis Feed Button






Efficiency Made Very Easy

December 15, 2008 00:12 AM  BY  STACEY BARRUS

Who isn’t a fan of saving energy, especially if it’s easy? More than ever before, homebuilders, househunters, and home renovators alike are looking for energy-efficient heating options for houses.We say they need look no further than radiant heaters for their ideal home heating solution.

Learn what many others are learning every day: radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home these systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate.

Radiant Heaters Tip: It might take a little effort, but being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste.

 


  Radiant Heat Information  

AddThis Feed Button






Hunting for a Heating Solution?

December 18, 2008 00:12 AM  BY  STACEY BARRUS

Quite simply put, radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home these systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate.

More than ever before, homebuilders, househunters, and home renovators alike are looking for energy-efficient heating options for houses. We say they need look no further than radiant heaters for their ideal home heating solution.

Radiant Heaters Tip: It might take a little effort, but being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste.

 


  Radiant Heat Information  

AddThis Feed Button






Radiant Monthly Newsletter - January 2010

January 07, 2010 00:01 AM  BY  WARMZONE


  Radiant Heat Information  

AddThis Feed Button






Non-Traditional Heating is Now Mainstream

December 20, 2008 00:12 AM  BY  STACEY BARRUS

Not traditionally used in heating homes, flat panel radiant heaters are used to heat objects via radiant heat transfer. These radiant heaters have traditionally been used in a variety of industries and applications, such as space heating, drying, curing, and water evaporation. More recently, these heating systems are also gaining popularity in home heating applications as well.

Radiant heaters use different types of emitter surfaces. Choices include: quartz, high-temperature glass, stainless steel, and ceramic tiles. These are all materials that are easily and efficiently used in home applications such as flooring, countertops, and towel racks. Because these items are easily turned into emitter surfaces for radiant heat, they can easily and beautifully be incorporated into home heating applications such as heated floors, walls, and towel racks.

To find out about radiant heaters for your home, check with the folks at warmzone.com. They have a complete product catalog of radiant heating solutions that can accommodate almost any application or budget.

Radiant Heaters Tip: radiant heaters a great way to efficiently heat a home, while maximizing your home’s beauty, but they are very cost effective and easy to install. 


  Radiant Heat Information  

AddThis Feed Button






Treat Yourself to Heat

December 27, 2008 00:12 AM  BY  STACEY BARRUS

Time to treat yourself! Whether you’re building a new home, or updating your current home, you owe it to yourself to check out the comfort that radiant heat has to offer. Now is the perfect time to look into your heating options. Radiant heaters can be used in a number of applications, including some that might surprise you!Among those spots that can use radiant heaters are tiled areas, hardwood flooring, carpeted areas, and even cement floors.

Not only is radiant heating is one of the most comfortable ways to heat your home, but radiant heaters also offer a diversity of applications. We’d be willing to bet that after that first winter with the radiant heaters in place, you may find yourself wondering how you ever got along without them in the past.

What’s interesting here is that, rather than warming the air, radiant heaters are a type of heater that warms objects. Radiant heat uses objects, such as the floor, to heat a home. The air in the room is warmed when it comes into contact with the warmed objects. Heat loss is reduced and the radiant heat remains in the lower part of the room, warmer near feet level and slightly less so at head level, creating the perfect climate for comfort.

Radiant Heaters Tip: Are you looking for efficient, comfortable heat for your home? We think that radiant heating could be just the solution you’ve been looking for.

 


  Radiant Heat Information  

AddThis Feed Button






Too Hot. Too Cold. No, We're Just Right!

September 20, 2007 00:09 AM  BY  WARMZONE

With a name like Warmzone, we have an unspoken obligation to live up to the task of matching our customers to the best available system of warmth and comfort.  We strive everyday to ensure that our products and our knowledgeable, dedicated staff will leave memories of service that is second to none, and products that will provide years of enjoyment.

A brief history of Warmzone allows consumers to understand why Warmzone was created. Warmzone realized the growth in the radiant heat industry was causing problems for consumer and contractors due to the abundance of technical information and product choices. Making the right choice for a radiant heat system is crucial and carries serious implications to its cost and effectiveness.  Serving as an intermediary between manufacturers, contractors and consumers, Warmzone’s role is to match individual needs of a project to a heating system that makes the most sense.  We strive to match our customer’s needs with the finest radiant heating systems available.  Warmzone.com offers non-biased, individualized solutions that factor the installation, durability, performance and operational investment as the key criteria for our customers.

There are several variables that Warmzone considers when looking at a project.  Some of these variables include:  square footage, the type of floor covering, the amount of heat needed for a given area, whether that heat will be the supplemental or primary source, how well insulated that environment is, and if it is a major remodel or completely new construction.
           
Based on this criterion, we can then discuss the benefits of a radiant heating system and which technology would be most appropriate for a consumer in terms of effectiveness, efficiency, operational costs and overall upkeep and maintenance.

Because radiant heat is relatively new in the United States, there is a continuing need to educate consumers about a wide variety of radiant solutions.  In the interest of avoiding confusion and finding the best possible application, Warmzone has done most of the homework for our prospective customers.  Our professional consultants learn the details regarding your heating goals and then propose a system that can be easily installed and will fit your budget.  Warmzone continues to strive toward being viewed as the premier radiant provider.  “We want customers to feel confident in this market and receive honest information and pricing regarding the best available products,” says Brandon Weaver, Vice President of Sales.

With so many options in the radiant industry, Warmzone.com is helping contractors and consumers with the pros and cons of each system.  Representatives of Warmzone suggest the best possible system for any project.  We are not tied to any one manufacturer and will provide the very best in pricing and information available.  Warmzone has a very direct relationship with select manufacturers thus eliminating the ‘one size fits all’ sales pitch normally received by homeowners. Using various forms of technology, Warmzone’s focus is to provide customers with the most pertinent information in record time. We know this is the key to establishing trust and long term partnerships.

As heating costs skyrocket, radiant heating continues to come to the forefront.  We at Warmzone excel in providing options that are affordable, convenient and specifically tailored to the needs of individual consumers.  As we match products with needs, we continually strive to provide our customers with “warm, pleasurable” heating experiences.  After all, feeling warm IS a wonderful thing!

We would welcome the opportunity to serve your needs. Visit us at www.warmzone.com, or call us directly at 1-888-488-WARM.       


About Warmzone
Warmzone provides consumers with energy-efficient, radiant heating solutions for homes and businesses. Based in Salt Lake City, Utah, Warmzone's electricians and radiant heat experts will help you determine the best radiant heating solution, ranging from electric heated floors to large commercial snow and ice melt projects. Send us a plan or drawings and we'll be happy to provide you with a FREE estimate and options for your roof heating and ice melting project.


  Radiant Heat Information  

AddThis Feed Button






Radiant Heaters Add Value and Efficiency to Homes

December 23, 2008 00:12 AM  BY  STACEY BARRUS

Even though it’s now Springtime (and forecasted high energy bills), homebuilders, househunters, and home renovators alike are looking for energy-efficient heating options for houses.  In fact, as builders and homeowners look for new ways to add value to homes in a weak housing market, they often look for upgrades that will add value and efficiency to their homes, which will help them sell.  We say they need look no further than radiant heaters for their ideal home heating solution.

In a nutshell, radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home, these radiant heater systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate.

Radiant Heaters Tip:  Being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste. 


  Radiant Heat Information  

AddThis Feed Button






Problem Solved!

December 22, 2008 00:12 AM  BY  STACEY BARRUS

Are your eyes so tired from all the research you’ve been doing because you’re looking to warm your floors with radiant heaters? We know, it sometimes can be hard to narrow down what kind of radiant heaters to install. There are dozens of products available to purchase, and there are even more companies telling you that their product is the best.

For many homeowners, electric cable heating systems, often called line- or high-voltage systems, are gaining popularity and are ideal for heating smaller areas like bathrooms, kitchens, and sun rooms. These systems are comprised of a thermostat and a heating cable. These radiant heater systems are oftentimes less expensive, and give the ability to customize a layout that will heat every square inch of your floor.

Every available radiant heater cable system is equally effective, so when determining which system to purchase, you should look at the warranty of the product, along with the ease of installation. Some cables must be embedded in a separate layer of concrete or mortar, whereas other systems can simply be installed in the thinset. Most radiant heater cable systems can only be installed under tile. However, on others, if the cable is embedded in mortar or concrete, any flooring can be installed on top of the concrete.

Radiant Heaters Tip: When heating smaller areas, it is nearly impossible to beat the simplicity and price of an electric cable radiant heating system.


  Radiant Heat Information  

AddThis Feed Button